- Make sure this fits by entering your model number.
- Powered via alligator clips direct to vehicle’s 12-Volt socket; Inflates up to 150 PSI and delivers 40 liters of air per minute
- Powerful direct drive motor is extremely quite and virtually vibration free, Only need about 90 Seconds you can fill full a complete tire, very speedy!
- 3.28 feet rubber air hose with quick connect valve and 6-feet power cord make it extremely easy and hassle-free to reach all vehicle tires
- Tire pressure can be monitored using the mounted pressure gauge
- Package includes: Portable Air Compressor x1, Removable 17” High Pressure Nylon Air Hose with Quick Release Chuck x1, Nozzle Adapters x2, Storage Box x1
Ideally designed for car/van/pickup tire/balls air mattress inflating. If you’re a newbie to the routine of inflating your own tires, don’t be intimidated: this compressor is a breeze to use, you can easily tell when the valve connector locks onto your tire’s valve stem, and there’s no discernible loss of air when you’re disconnecting the compressor from the tire. These features — along with seemingly well-built and assembled components, plus a very reasonable price — make for a winning combination.
Specifications:
Made by: TS16949 Certified Manufacturer
Air Compressor Size: 6.5 x 2.8 x 5.2 inch
Maximum Output: 150 PSI
Flow: 40L/min
Instructive Steps:
1. The instructions are very good—easy to understand. You’re up and running out of the box in about 3 minutes. Here’s exactly what to do for a car tire:
—-Connect the yellow PVC coiled hose to the black rubber hose on the unit. It snaps into place with a quick connect collar.
—-Plug the unit power cord into the car cigarrette lighter. The cord is long enough for you to connect
—-The pre-attached nozzle on the end of the hose is what you want for a normal car tire–ready to go right out of the box. No attachments are needed. Screw that into your tire’s air valve
—-Flip the power switch on the unit, and watch the psi climb on the gauge
—-Turn off when you hit the right psi for your car
2. Usually, the Corvette, for example, had a completely flat tire, and this compressor took it from pancake flat to 35 psi in 5 minutes. there is no need to stop and let it cool off. That silver-colored metal housing block you can see on top of the unit heats up a little, but that’s what it’s meant for. The silver cooling fins are designed to dissipate heat
3. The unit is actually less loud and grating than the air-blowers you use to inflate air mattresses, balls or any vehicle tires